Lighting Solutions

MHDA LED

Linear LED lighting for hazardous locations
Industry
Food Processing | Industrial | Marine | Oil Field
Type
LED
Luminaire
Linear
Class
Class I, Division II | Class II, Division II | Class III

Standard Features:

  • Heavy-duty continuous seam welded 1/16″-thick housing
  • Impact-resistant 1/8″-thick lens with reinforced corners
  • Component-assembly-tray held captive by two nylon-coated, stainless steel cables
  • Toolless, cage-clamp terminal block
  • Two 3/4″ NPT conduit hubs
  • Field-replaceable LED circuit boards and drivers with quick disconnects
  • Toolless entry via over-the-center cam latches

Additional Features:

  • Supplemental 10kV surge protection
  • Vibration-dampening, factory-installed mounting feet
  • Dimmable driver
  • Optional polycarbonate lens
  • Stainless steel, 45-degree, fixed-wall mounting kit available
  • 5-year warranty

Classifications:

  • Class I, Division 2, Groups A, B, C and D
  • Class II, Division 2, Groups F and G
  • Class III
  • Zone 2, Groups IIA, IIB and IIC
  • UL 844 hazardous locations
  • UL 924 emergency lighting
  • UL 1598A marine outside type
  • cUL listed
  • UL 8750 LED safety
  • UL 1598 wet locations
  • ABS type approved
  • IP66
  • 1.26 spacing criteria-compliant
  • 55° ambient temperature

Standard Materials:

  • Body: 5052-H32 aluminum (less than .4% copper content) with baked-on white epoxy finish
  • Gasket: one-piece silicone
  • Lens: acrylic
  • Hubs (2): A360 aluminum (less than .4% copper content)
  • Component tray: 5052-H32 aluminum (less than .4% copper content)
  • Latches: stainless steel
  • Mounting feet: stainless steel
  • Hardware: stainless steel

Contact Us

Request More Information

Downloads

Share This