Colorful Coils 4

AZZ Inc.

One Museum Place
3100 West 7th Street, Suite 500
Fort Worth, Texas 76107

Metal Coatings

Investors

About Us

Careers
Our Culture
Historical Timeline
Contact Us
Terms and Conditions

Do Not Sell or Share My Personal Information

Locations

Facility Locator
AZZ Locations Listings

Dialog window

PCM Foundations

A sampling of our popular textures:

Silver Metal Shine

Brushed Steel

Light Silver Metal

Dialog window

PCM Xtremes

PCM Xtremes ensure optimal performance and longevity in harsh environments:

Air Water Ground

Air/Water/Ground

Temperature Fire

Temperature/Fire

Caustic Chemical

Caustic/Chemical

Dialog window

PCM Mimics

A sampling of our popular textures:

Architectural Tile

Barnwood

Bottomland Print

Camo Leaf

Generic Asphalt

Generic Ashalt

Generic Camo

Light Brown Wood

Maple

Oak 3

Pau Ferro Wood

Pau Ferro

Rosewood

Stone Wall

Walnut Print

Dialog window

Coil Coating Process

Exit End (Recoiler)

Once the metal is cleaned, treated, and painted, the strip is rewound into a coil size prescribed by the customer. From there, the coil is removed from the line and packaged for shipment or additional processing.

Dialog window

Coil Coating Process

Exit Accumulator

Like the Entry Accumulator, the Exit Accumulator adjusts up and down to store metal while the recoiler is unloading a completed coil.

Dialog window

Coil Coating Process

Top Coat

After the primer is applied and cured, then the metal strip enters the finish coat station where a topcoat is applied. Topcoats provide color, corrosion resistance, durability, flexibility and any other required physical properties. Like primers, the topcoat is cured using thermal cure ovens.

Oven

Coil coating ovens can range from 130 feet to 160 feet and will cure the coatings in 13 to 20 seconds.

Dialog window

Coil Coating Process

Prime Coat

During this stage, the strip enters the prime coat station whereby a primer is applied to the clean and treated metal. After the primer is applied, the metal strip travels through a thermal oven for curing. Primers are used to aid in paint adhesion, improve corrosion performance and enhance aesthetic and functional attributes of the topcoat.

S Wrap Coater

The S wrap coater design allows for primers and paints to be applied to the top and back side of the metal strip simultaneously in one continuous pass.

Dialog window

Coil Coating Process

Cleaning & Pretreating

The cleaning and pretreating section of the coil coating process focuses on preparing the metal for painting. During the cleaning stage, dirt, debris, and oils are removed from the metal strip. From there, the metal enters the pretreatment section and/or a chemical coater whereby chemicals are applied to facilitate paint adhesion and enhance corrosion resistance.

Dried-In-Place

In this stage a chemical that provides enhanced corrosion performance is applied. This treatment can be chrome free if required.

Dialog window

Coil Coating Process

Entry Accumulator

The accumulator is a structure that adjusts up and down to store material, which makes continuous operation of the coil coating process possible. This accumulation will continue to feed the coil coating processes while the entry end has stopped for the stitching process. As much as 750 feet of metal can be collected.

Dialog window

Coil Coating Process

Entry End

Uncoiler

Metal coils, up to 60,000 pounds, are received and undergo visual inspection before moving to the uncoiler for unwinding.

Coil Stitch

At this stage, previous and next coil ends are mechanically joined, ensuring continuous feed in the coil coating line.

Colorful Coils 4

Stay Connected With the Latest Investor News